Discussion
Hi,
The AJP is running with fairly high CR which may be challenging when re-mapping tuning the engine. As a safety measure, it would be an advantage to have a knock sensor fitted (assuming the car got a ECU supporting aftermarket knock sensor).
Did anyone in here fit aftermarket knock sensors? If “yes”, then which one did you choose and where on the engine were they fitted?
Any thoughts and comment on the subject is welcome.
Hope to hear from you
The AJP is running with fairly high CR which may be challenging when re-mapping tuning the engine. As a safety measure, it would be an advantage to have a knock sensor fitted (assuming the car got a ECU supporting aftermarket knock sensor).
Did anyone in here fit aftermarket knock sensors? If “yes”, then which one did you choose and where on the engine were they fitted?
Any thoughts and comment on the subject is welcome.
Hope to hear from you
I use this company's products on the dyno https://phormula.com/
on the cerb you have some nice central bosses direct to the block on the alternator mount plate.
on the cerb you have some nice central bosses direct to the block on the alternator mount plate.
Gassing Station | Cerbera | Top of Page | What's New | My Stuff