SP6 cylinder 6 spark plug
Discussion
Good evening,
First time removing the spark plugs, there doesn’t seem to be enough clearance room to remove the lead from cylinder 6 or am I just being too careful and a bit more force pulling it towards the front of the car is needed?
I was hoping to see what the guy on saving salvage did but he skipped that part!
Thank you
Regards
Martin.
First time removing the spark plugs, there doesn’t seem to be enough clearance room to remove the lead from cylinder 6 or am I just being too careful and a bit more force pulling it towards the front of the car is needed?
I was hoping to see what the guy on saving salvage did but he skipped that part!
Thank you
Regards
Martin.
There is definitely too little space, but somehow it should work. If the spark plug goes out easily, your left engine mount might be broken.Hi Ulf
Thanks...... funny enough the engine mounts were kaput! Maybe I should have changed the plugs before they got replaced.
Yes too little room, but enough SP6 spark plugs have been changed over the years so it cannot require lowering the engine. I thought maybe some one here could offer advice with the necessary wiggling and jiggling to get the lead out without damaging it - which is my big fear.
Cheers
Martin.
Thanks...... funny enough the engine mounts were kaput! Maybe I should have changed the plugs before they got replaced.
Yes too little room, but enough SP6 spark plugs have been changed over the years so it cannot require lowering the engine. I thought maybe some one here could offer advice with the necessary wiggling and jiggling to get the lead out without damaging it - which is my big fear.
Cheers
Martin.
Edited by Martin_MUC on Tuesday 28th June 23:35
Gassing Station | Cerbera | Top of Page | What's New | My Stuff