Throttle Return Springs
Discussion
Anyone know if the Throttle Return Springs located at the end of the spindles can be bought seperatly (without the whole spindles and or linkages)
It seems that mine have become worn and thus the throttle return does not snap closed as it once did.
There is also a seperate spring connected to a 1/4" BSP compact 90* hose fitting located at the top rear of the engine (this I assume has been added to help the return)....any comments please,
Regards,
Cooky
Edited to say 4.2 1997
>> Edited by Cooky on Tuesday 9th August 19:37
It seems that mine have become worn and thus the throttle return does not snap closed as it once did.
There is also a seperate spring connected to a 1/4" BSP compact 90* hose fitting located at the top rear of the engine (this I assume has been added to help the return)....any comments please,
Regards,
Cooky
Edited to say 4.2 1997
>> Edited by Cooky on Tuesday 9th August 19:37
Not sure whether this thread may be of help.
www.pistonheads.com/gassing/topic.asp?t=69466&f=6&h=0&hw=linkage
www.pistonheads.com/gassing/topic.asp?t=69466&f=6&h=0&hw=linkage
Gassing Station | Cerbera | Top of Page | What's New | My Stuff