Re-con Clutch option
Discussion
As some of you will know, my Cerb is with Autocraft at present and in addition to the re-build we discovered that the clutch needed replacing.
Due to the difficulty in sourcing one from AP or TVR, Dave has got mine re-conditioned at a cost of £395.
He mentioned that he would offer this service to others so thought I would let you know.
Cheers, JT
p.s. Ash, I'm not muscling in on your manor, honest Guv! ;)
Due to the difficulty in sourcing one from AP or TVR, Dave has got mine re-conditioned at a cost of £395.
He mentioned that he would offer this service to others so thought I would let you know.
Cheers, JT
p.s. Ash, I'm not muscling in on your manor, honest Guv! ;)
Extra 300 Driver said:
Thats good news, I knoew recons were out there.
How do that replace the fingers? Do they have a supply?
Hi E3D,
they do replace the fingers along with pressure plate etc etc. I'm not sure where they source the supply but as specialists I assume they have continuity of supply hence the offer to other Cerb owners.
Hope this helps.
JT
Coincidentally I have just emailed TVR Craft with an enquiry as to cost and details as they list a complete clutch upgrade on their website:
"Install a superior clutch and flywheel system including far superior hydraulics (this will throw away your clutch worries for at least 15k upwards to 30k miles*)"
"Install a superior clutch and flywheel system including far superior hydraulics (this will throw away your clutch worries for at least 15k upwards to 30k miles*)"
J.T. said:
Extra 300 Driver said:
Thats good news, I knoew recons were out there.
How do that replace the fingers? Do they have a supply?
Hi E3D,
they do replace the fingers along with pressure plate etc etc. I'm not sure where they source the supply but as specialists I assume they have continuity of supply hence the offer to other Cerb owners.
Hope this helps.
JT
Fantastic, so relined pressure plates and new finger diaphragm for £395! is that service available for the early 4.2 AP clutch that's no longer available?
Hi
What's the best way of contacting TVR Craft? I've had my car in the garage for 2 months with broken fingers! If I could get hold of the Russian bloke it's be more than his fingers that would be broke! I can't believe there's a shortage, it's not like TVR don't know that everybody will need one!
What's the best way of contacting TVR Craft? I've had my car in the garage for 2 months with broken fingers! If I could get hold of the Russian bloke it's be more than his fingers that would be broke! I can't believe there's a shortage, it's not like TVR don't know that everybody will need one!
Hi Braddy,
ring Dave at Autocraft on 01722 411118 - you're welcome to mention that I gave you the number (it'll also ensure I get my hands on Ash's commision
)
Stick with the pain fella - my Cerbs been away for almost 5 months and I'm really missing her but I know it's gonna be worth the wait.
All the best, JT
ring Dave at Autocraft on 01722 411118 - you're welcome to mention that I gave you the number (it'll also ensure I get my hands on Ash's commision
) Stick with the pain fella - my Cerbs been away for almost 5 months and I'm really missing her but I know it's gonna be worth the wait.
All the best, JT
Gassing Station | Cerbera | Top of Page | What's New | My Stuff





