strange noise from engine
Discussion
Probably the bonnet release rod flapping against the bulkhead.. The plastic clips break from heat corrosion and then the rod flaps about when going over bumps / general driving.
It's the rod that retracts both bonnet pins. you should be able to see it under at the top just under the windscreen (even with the engine cover on)
They're only a few pence each.
It's the rod that retracts both bonnet pins. you should be able to see it under at the top just under the windscreen (even with the engine cover on)
They're only a few pence each.
Gassing Station | Cerbera | Top of Page | What's New | My Stuff


