fuel lines

[jesfirth]

does anyone know what the fuel line size/material is for the cerb?

[gazzab]

paper?

[budaholic]

I would have said more like MacDs drinking straws!

[purpleheadedcerb]

I've no idea what the cerbera has but I'd probably replace it with something like this.

http://rallynuts.com/motorsport/Fuel_Hose_254/Sytec_

Scott

[ridds]

Anything above 8mm should be fine. Not sure if you need a burst pressure of 1600 PSI though.

20 tops would be fine.

Nice bit of braided stuff would be good.

Last one £6.54 per metre.

here

[purpleheadedcerb]

Just to add the 8mm stuff linked to at rallynuts is overbraided and 2.50 per metre. Plus you have got an extra 1280psi of line pressure should you need it! I've used them for alot of stuff in the past and they are very good.



>> Edited by purpleheadedcerb on Tuesday 17th January 22:52

[jesfirth]

thanks guys. Also should I be lagging the hose with the heat resistant pipe lagging-you know the silver stuff-very technical description!

[ridds]

purpleheadedcerb said:

Just to add the 8mm stuff linked to at rallynuts is overbraided and 2.50 per metre. Plus you have got an extra 1280psi of line pressure should you need it! I've used them for alot of stuff in the past and they are very good.>> Edited by purpleheadedcerb on Tuesday 17th January 22:52

Think you'll find it's £7.00 per metre.

[purpleheadedcerb]

You are absolutely right. Didn't realise that there were two 8mm versions, the cheaper not being braided, just read the text that said the 8mm was braided!

Oh well, I retract. Don't use Rallynuts, their website is misleading

[ridds]

I had to check as at that price I'd be buying loads of it!