Help Boss

[raf dug]

I need Boss cerberas, E-mail address rather quickly or my car may be off the road for longer than neccessary(a lot longer).
Can't find any of his posts.

[raf dug]

How does he spell his name member search can't find him with or without capitals?

[cerealsurfer]

www.pistonheads.com/gassing/profile.asp?h=0&memberId=30082&f=163&t=232726

[davetherave1970]

You're not really trying hard enough are you
www.pistonheads.com/gassing/profile.asp?h=0&memberId=30082

Bugger....you beat me to it.

>> Edited by davetherave1970 on Wednesday 25th January 15:39

[raf dug]

MikeyT said:

Why is it off the road dug? No problem I hope.

it went in for a service, but they found problems, i had a word with the guy who sold me it and he was very nice about it he sent me £1000 towards it, it currently stands at £1800 though.
What I thought was a slight oil leak was power steering fluid So the rack had to be taken off and sent away x-rayed and repaired(2weeks)
looks like it might have caught a cerb as the lower front suspension arm drivers side was kinked and rotten the upper arm was also rotten as was the upper arm passenger side.
All these things have now been done but it has a pin hole in a complicated(photo to follow) metal waterpipe Two big ends and two smaller ends for hoses coming off it, and TVR Blackpool Have told Peninsula where my mate the macca f1 engineer gets his parts that they haven't got any and have no plans to make anymore this year, Peninsula have offered to make him one themselves but it will cost Another £115 and take another few days.
Thats what I e-mailed The Boss about as I had a nice chat with him about cerbys at BTAP and if anybody knows where to find a part for a cerby it would be phil
Oh and it has been waxoyled and will be having its brake blocks colour matched, oh and while i'm here some spanner had silicon sealed the HT leads on to the spark plugs which were apparantly a TT to get off without damaging the leads(last service TVR Blackpool 2000 miles ago, I don't think they would do that though. They must have been popping off your only meant to clean them and put them back on not seal the Fookes on, apart from that it's fooking ace and still gets me attention off the ladyz even when it's in a garage, cos eveyone knows whos ort the best looking car in Stafford
Only trouble is i have a PH xmas do in Manchester Friday and they have given me a white diesel saxo van with windows
Oh well life could be worse at least I'm not ugly(doH)

[davetherave1970]

You could try these two places!

www.douglasvalley.co.uk/
www.bellhillgarage.co.uk/

[raf dug]

davetherave1970 said:

You could try these two places! www.douglasvalley.co.uk/ www.bellhillgarage.co.uk/

O.k mate I'll tell him but he's not on the www yet he's far too busy even with 6 blokes , he was jam packed with evo 8's and scoobys today and I feel bad cos my car was only booked in for a day and It's blocking up one of his ramps as it has no front wheels.
Have you numbers for them mate.
There's an MR2 in there with exhausts I can get both my arms in TEN inch diameter each.

[raf dug]

Help I need one of these:thunbup:

[cerealsurfer]

Look here and thou shalt find...

www.actproducts.co.uk/hoses.php

should get you out of trouble at least.

[raf dug]

cerealsurfer said:

Look here and thou shalt find... www.actproducts.co.uk/hoses.php should get you out of trouble at least.

What a star I will pass your info on, I owe you one nothing you need will be too much trouble ever, cheers Dougie.

[speed8]

Dougie

Get the set from Tim. There are two metal pipes and if one is gone then the second is likely not far behind it. Probably worth getting the silicon hose set as well, the rubber ones are probably rotten. If it's coming off then it's a good time to change it all, it's a bugger of a job.

Andy

[Julian64]

speed8 said:

Dougie Get the set from Tim. There are two metal pipes and if one is gone then the second is likely not far behind it. Probably worth getting the silicon hose set as well, the rubber ones are probably rotten. If it's coming off then it's a good time to change it all, it's a bugger of a job. Andy

Its really easy with a ramp , but if your gonna do that then you might as well buy a new water temperature gauge cos I guarantee you won't get the old one off in one piece.

[jon h]

Dug

I have just put the stainless ones in my car last weekend. The steel ones are a bit rusty, but sound. In fact once out of the car, they seem better than they looked in situ. You could clean them up and paint/powder coat and they would be good as new. You are welcome to them for the cost of delivery, as they were heading for the bin. (I am in Warwickshire, by the way)

Jon H

[speed8]

Julian64 said:

speed8 said: Dougie Get the set from Tim. There are two metal pipes and if one is gone then the second is likely not far behind it. Probably worth getting the silicon hose set as well, the rubber ones are probably rotten. If it's coming off then it's a good time to change it all, it's a bugger of a job. Andy Its really easy with a ramp , but if your gonna do that then you might as well buy a new water temperature gauge cos I guarantee you won't get the old one off in one piece.

It's ok for some eh, ramp, luxury.

My temp gauge came off fine though

[raf dug]

jon h said:

Dug I have just put the stainless ones in my car last weekend. The steel ones are a bit rusty, but sound. In fact once out of the car, they seem better than they looked in situ. You could clean them up and paint/powder coat and they would be good as new. You are welcome to them for the cost of delivery, as they were heading for the bin. (I am in Warwickshire, by the way) Jon H

OOh thanks mate I'll check in the morning but I think Peninsula have started making me one as TVR are nmot making anymore this year.Cheers Dougie.

[raf dug]

Thanks BOSS you have Huge mail(almost a book) cheers Dougie.