Boot Release Mechanism Fault

[jdf]

My boot badge release switch keeps playing up it either doesn't respond or it repeatedly triggers the release mechanism but both faults are intermitent.

Anybody had a similar thing?

How easy is it to remove the badge / boot switch and is it serviceable or just a replacement job?

[exocet]

Had a similar problem a while ago. Ended up replacing the motor behind the badge that operates the release mechanism. You have to peel away some carpet, and it's a bit fiddly to get to, but can't be too hard as I managed it!

The motor is a bog standard central locking motor, got a replacement from local car stereo shop.

It may be worth checking that the button itself doesn't just need adjusting, there a couple of bolts that can be loosened/tightened behind the badge near the motor.

Hope some of that rambling helps!

Jo

[grey42cerbie]

I had this in the early days. It's fairly easy to remove the badge, rubber boot and spring. Give them all a good clean and re-assemble them with some grease in the boot. The trigger mech is very sensitive to the tightness of the two bolts when you put them back. Just play around until it's right. 10 minutes max.

Cheers, Steve
Grey 4.2 Cerbie

[jdf]

Thanks for the help - My job for the weekend