Anyone had a new timing chain ?
Discussion
Does anyone know if there's supposed to be any after service once you've had one swapped.
The place that swapped mine never mentioned the car going back, but on another occasion a mechanic there mentioned the car going back after a 1000 miles, to see if any adjustments need to be made.
Is there a definitive view ?
The place that swapped mine never mentioned the car going back, but on another occasion a mechanic there mentioned the car going back after a 1000 miles, to see if any adjustments need to be made.
Is there a definitive view ?
RUSSELLM said:
Does anyone know if there's supposed to be any after service once you've had one swapped.
The place that swapped mine never mentioned the car going back, but on another occasion a mechanic there mentioned the car going back after a 1000 miles, to see if any adjustments need to be made.
Is there a definitive view ?
From this thread. www.pistonheads.com/gassing/topic.asp?t=229102&f=6&h=0
jonnyw said:
Picked up Cerby from Andy last night having had an engine rebuild, what a job !
Now the hard part, can't go over 3000 rpm for 200 miles and then can lift it by 500rpm every 100 until 4500, then has to go back to Andy to have the chain tightened and valves checked etc..
APMAUTO said:
ajp8 chain tensioners are not self adjusting, when fitting new timing chains you invariable get some initial chain stretch hence the need to check the chain tension
regards andy
hth
>> Edited by SlvrCrb on Tuesday 23 May 10:19
RUSSELLM said:
I don't think, there's a definate answer on this. I think "Power" recommend it at 50k (best to confirm that with them), unless they've already got your engine apart.
No one knows. I asked TVR Power once, and they change then at 40k miles if they are doing any engine work. But no one knows how long they should last. Mines been in there a while...... I recall joo sayng he'd only seen one broken one in all his years, or something like that.
Gassing Station | Cerbera | Top of Page | What's New | My Stuff


