Air con condenser / radiator
Air con condenser / radiator
Author
Discussion

Ireland

3,517 posts

243 months

Friday 30th June 2006
quotequote all
?????????????????

RUSSELLM

Original Poster:

6,002 posts

276 months

Saturday 1st July 2006
quotequote all
Sorry I deleted the thread,

Apparently my air con radiator / condenser has a hole in it.

Does anyone know how difficult it is to remove ? Could the local air con place have a go at it ?

cossiemetro

1,092 posts

269 months

Saturday 1st July 2006
quotequote all
as usual its it probably from a granada or something normal ????
a decent A/C chap would be able to tell

RUSSELLM

Original Poster:

6,002 posts

276 months

Saturday 1st July 2006
quotequote all
I've had a look at the top thread and apparently it's made by "Hella"

Was more wondering how difficult it is to remove ?

Looks like the engine rad & hoses have to come off first.

cerby4.5

1,643 posts

270 months

Saturday 1st July 2006
quotequote all
Hiya
Yes they do, as have just done mine and is a real pig of a job! Happy to talk you through it if you need any help?
Scott

RUSSELLM

Original Poster:

6,002 posts

276 months

Monday 3rd July 2006
quotequote all
Thanks for the offer Scott, I think i'll let the air con place confirm the source of the leak, then get my indie to remove it for them.

jesfirth

1,743 posts

271 months

Tuesday 4th July 2006
quotequote all
The job isn't too bad if you are ok with a spanner. the only things that have to come out are the fornt fibreglass cover, cooling system rad with the fans still attached and then the a/c rad itself, after disconencting 2 pipes. It took me about 3/4 hour to get mine out and about an hour to get it all back in again, filled bled cooling systme etc. The worst bit is relocating the top bolts for the cooling system rad. if you do it yourself you will have an added advantage in that you can get at previuosly inaccessable parts of the chassis to clean and repaint them while you have the rad recored.