windscreen wipers stop working - help!
Discussion
Hi,
Wonder if anyone out there can help - driving into work this morning and cerbie's windscreen wipers stop working - squirters still work but no movement from the wipers themselves.
i checked the control boxes in the bach, but none of these are labelled as wiper box, however - two of the boxes are not labelled at all.
Also - does anyone know what the fuse layout - number for this wipers - my handbook is at home, and I am not! 8-)
Any help gladly recieved.
Thks
Stuart.
Wonder if anyone out there can help - driving into work this morning and cerbie's windscreen wipers stop working - squirters still work but no movement from the wipers themselves.
i checked the control boxes in the bach, but none of these are labelled as wiper box, however - two of the boxes are not labelled at all.
Also - does anyone know what the fuse layout - number for this wipers - my handbook is at home, and I am not! 8-)
Any help gladly recieved.
Thks
Stuart.
Had this on mine twice,
looking at the car from the front, take off the battery cover bit (two alen bolts).
you should be able to see the wiper motor, on the left hand side of it yo should see a small block connector.
Give this a clean with contact cleaner and see if that helps, did for me.
Another option is rain X, oh and keep above 70 as any water beads away nicely.
Nick.
looking at the car from the front, take off the battery cover bit (two alen bolts).
you should be able to see the wiper motor, on the left hand side of it yo should see a small block connector.
Give this a clean with contact cleaner and see if that helps, did for me.
Another option is rain X, oh and keep above 70 as any water beads away nicely.
Nick.
The wiper control box is in the footwell, next to the ecu. You can also check the steering wheel buttons control box by holding down the wiper+ wipe/wash buttons together and then pressing full beam and then letting go of all the buttons. If the main beam stays on then that box is ok. The fuse is no 7* (on mine anyway) and it also runs the mirrors so if they are working, the fuse is ok.
* not necessarily the same for all cerbs
* not necessarily the same for all cerbs
Edited by SlvrCrb on Monday 21st August 11:15
So now have the opposite problem.
Checked the connector behind the motor for the wipers - and the connection dropped away hanging loose from the motor - now the windscreen wipers just continually stay on, and cant switch them off (Altho the speed variation happens) arrrgghhhh
Anyone got any ideas on this one??
Please help - this is driving me insane
Checked the connector behind the motor for the wipers - and the connection dropped away hanging loose from the motor - now the windscreen wipers just continually stay on, and cant switch them off (Altho the speed variation happens) arrrgghhhh
Anyone got any ideas on this one??
Please help - this is driving me insane
First off pull them off the windscreen, put the wipers on by pressing appropriate button and then work them by hand, sometimes this is all it needs to get them going again. If so, clean your windscreen and always make sure plenty of moisture on screen else it may happen again, but at least you'll know the quick fix.
If not, see other answers...
Cheers
MB
If not, see other answers...
Cheers
MB
Gassing Station | Cerbera | Top of Page | What's New | My Stuff



