Help... my door buttons not working
Discussion
It'll be the connector in the door panel. I've found that when a connector starts playing up, you can clean it up and it'll work again for a short while. Your best bet is to do the job right the first time and cut the connector out and replace with new.
I learnt my lesson after spending best part of a week taking the door panel on and off
I learnt my lesson after spending best part of a week taking the door panel on and off

BLUETHUNDER said:
Is the button on the inside on a different plug from the outside button then?
The cables entering the door are all in 1 large multiplug. There is another plug between the door wiring and the door card to allow you to remove the card.
It is more than likely that they are all corroded to some extent. Remove the door card by undoing the allen head screws round the perimeter and all will be obvious.
Gassing Station | Cerbera | Top of Page | What's New | My Stuff



