Clutch slipping when putting the gas down

[harty]

but now I have no clutch at all. It is not the clutch master/slave cylinders(already had two in the past 12 months) so sounds as though I now need new clutch??? What's the cost for a fitment of one of these??

Cheers

[Extra 300 Driver]

£500 for the clutch and that again to fit it. have the slave seals done again, as it may save you money in the future.

Intrested to know what has gone wrong.

[jensena]

get the clutch from Clevor Trevor - It come complee with with an uprated Slave Cyliner.

Edited by jensena on Friday 27th October 07:56

[V8CER]

mine did this a couple of months after a master cylinder change.changed the clutch - still slipped under load changed the master cylinder again fixed it!! apparently some master cylinders produce swarf which blocks the return line and holds the slave in contact with the clutch cover reducing clamping load and causing slippage.
This was the case with mine the pedal felt strange and bit right at the top.

v8cer

[Extra 300 Driver]

Check the master is adjusted correctly, there should be a small amount of play on the pedal.