4.5 Battery
4.5 Battery
Author
Discussion

Lurkio

Original Poster:

107 posts

243 months

Saturday 9th December 2006
quotequote all
What and where can you buy the best value battery for money Cerbera 4.5 LW and how hard is it replacing it, many thanks, Chris.

nitro cerb

1,517 posts

277 months

Saturday 9th December 2006
quotequote all
I think alot of the guys have used halfords as they do free fitting too. It can be a pain to do so this might be of use!

I think from memory its a 072 or 075 cant remember.

gazzab

21,640 posts

311 months

Saturday 9th December 2006
quotequote all
type 072.
I wouldnt let halfords fit it for me though!

touching cloth

11,706 posts

268 months

Saturday 9th December 2006
quotequote all
Yep did my own with the Halfwits one, if I can do it then it must be presumed to be pretty much a piece of pee.

Edited by touching cloth on Saturday 9th December 19:37

esso

1,849 posts

246 months

Monday 11th December 2006
quotequote all
If you purchase one from Halfords make sure it fits in the aperture in the wing.I bought one from them for my 4.5 and it was too tall!Got a "Banner" one from local parts shop(£70)-no problem.Best to take the old one with you so they can check the outside dimensions of the casing.

gazzab

21,640 posts

311 months

Monday 11th December 2006
quotequote all
and ensure the pos and neg arent reverse pos of original.

Cyclone1

2,614 posts

275 months

Monday 11th December 2006
quotequote all
Chris,

Best bet is to try and remove your old one and take it with you. The Halfords 072 should fit as this is what I have in mine, it also has a 3 year warranty and judging by the way the Cerbs get through batteries (some, not all), you'll probably never have to pay for another battery again.

Remove the top protective cover (under windscreen)

Unbolt the passenger side airbox and loosen away from brackets

Remove the purple pipes from the airbox and not the top of the engine, and this will allow you to move the airbox out of the way of the battery

Remove the bracket that holds the battery in place (bottom of battery)

Then the tricky part! Wriggle, pull, lift the battery all in one movement to get it to clear the raised bolt hole at the bottom front of the battery, you may need a big screwdriver to lever and persuade it free.

Once free disconnect both terminals and away you go to Halfrauds.

If all goes to plan it should take around half an hour, just make sure you have the right allan keys and socket set bits.


Jules.

lurkio

Original Poster:

107 posts

243 months

Monday 11th December 2006
quotequote all
Thanks for that lads, I take note on what your saying Jules, thanks again, Chris.