Discussion
Hi i'm looking for some new floor mats for my cerbera i was just wondering if someone could point me in the right direction? I have searched on the net but no real luck.Mine are navy blue with magnolia trim. ideally i would like them to have metal heel plates and the cerbera logo on them.

C8 CDS said:
Do you find they slippery if its a wet day and you get in with wet shoes on??
Not to the extent that it is ever a problem.
I don't find my feet slipping when I go for the pedals or anything like that.
Like I said, I had planned to throw them out but now I reckon they are in there to stay.
I'd say the ones in mine were cut by some engineering works from a cardboard template, or similar, as they definitely weren't laser-cut as you'd expect with "factory" items.
My drivers side overmat was looking very tired with the plastic heel protector containing large tears and actually getting a little dangerous as my heel kept catching. I've replaced the plastic with a ally heel plate from Level. £60, but it does look good. And since it's slightly larger than the old plastic protector, I've managed to hide some of the wear just outside the plastic part.
Another plus for Autostyle
www.autostyle.co.uk/
I bought mine from here and have put them over the top but they are easilt thick enough to act as replacements for the originals if required. The fit is excellant and the quality is superb and I was surprised with their thickness.
I was so impressed I bought a set from these people for my Son's Focus.
www.autostyle.co.uk/
I bought mine from here and have put them over the top but they are easilt thick enough to act as replacements for the originals if required. The fit is excellant and the quality is superb and I was surprised with their thickness.
I was so impressed I bought a set from these people for my Son's Focus.
byker28i said:
Another plus for Autostyle
www.autostyle.co.uk/
I bought mine from here and have put them over the top but they are easilt thick enough to act as replacements for the originals if required. The fit is excellant and the quality is superb and I was surprised with their thickness.
I was so impressed I bought a set from these people for my Son's Focus.
Sorry it was auto style i got mine from.I used them as direct replacements for my old carpets. www.autostyle.co.uk/
I bought mine from here and have put them over the top but they are easilt thick enough to act as replacements for the originals if required. The fit is excellant and the quality is superb and I was surprised with their thickness.
I was so impressed I bought a set from these people for my Son's Focus.
Anyone got pictures of these mats fitted, can tey really be used as replacements rather than just overmats too
Also did anyone go for the ally heel pads & Cerbera logos, if so what position did you get the logos in, what do they look like in the car
. Are they good fits what about the rears
So many questions, I suppose at only £60 a pop it doesn't really matter
Also did anyone go for the ally heel pads & Cerbera logos, if so what position did you get the logos in, what do they look like in the car
. Are they good fits what about the rears
So many questions, I suppose at only £60 a pop it doesn't really matter
Edited by HarryW on Sunday 14th January 14:49
HarryW said:
Anyone got pictures of these mats fitted, can tey really be used as replacements rather than just overmats too
Also did anyone go for the ally heel pads & Cerbera logos, if so what position did you get the logos in, what do they look like in the car
. Are they good fits what about the rears
So many questions, I suppose at only £60 a pop it doesn't really matter
I used mine as direct replacements.The fit is the same as th original carpets but better due to the fact the carpet is stiffer so you dont get the typical scrunched up carpet of the original.I had mine done with the TVR logo on them.
Also did anyone go for the ally heel pads & Cerbera logos, if so what position did you get the logos in, what do they look like in the car
. Are they good fits what about the rears
So many questions, I suppose at only £60 a pop it doesn't really matter
Edited by HarryW on Sunday 14th January 14:49
I put mine over the top but they are so think I was thinking of just replacing them as my originals have started fluffing with use. They are exactly the right fit and almost as think as the originals plus the stuck on backing/soundproffing.
I didn't have the logo, or the alloy plates but had the carpeted pads. They are really think and work well. I'll try and grab some photo's tomorrow evening.
I didn't have the logo, or the alloy plates but had the carpeted pads. They are really think and work well. I'll try and grab some photo's tomorrow evening.
Right folks, just searched and found this thread.....
I'm going to go for the logos on the sides.
http://www.autostyle.co.uk/designer_car_mats.asp
Any recomendations on whether to go for the carpet or metal inserts please ?
I'm worried the metal inserts will look to "max power"
I'm going to go for the logos on the sides.
http://www.autostyle.co.uk/designer_car_mats.asp
Any recomendations on whether to go for the carpet or metal inserts please ?
I'm worried the metal inserts will look to "max power"
Those metal platesa with holes in wear a bit funny after a while, get any mud in there and it tends to ruin the carpet in the holes. If you tend to keep your car clean then they should be ok.
Not sure what I'd chose, fabric won't ruin your shoes but will compress over time and could look ratty. Then again it's so far down the footwell you'd not see the wear.
Not sure what I'd chose, fabric won't ruin your shoes but will compress over time and could look ratty. Then again it's so far down the footwell you'd not see the wear.
RUSSELLM said:
Right folks, just searched and found this thread.....
I'm going to go for the logos on the sides.
http://www.autostyle.co.uk/designer_car_mats.asp
Any recomendations on whether to go for the carpet or metal inserts please ?
I'm worried the metal inserts will look to "max power"
Metal inserts look a bit maxpowerish.Phone them direct and get the exact design you want.I'm going to go for the logos on the sides.
http://www.autostyle.co.uk/designer_car_mats.asp
Any recomendations on whether to go for the carpet or metal inserts please ?
I'm worried the metal inserts will look to "max power"
Gassing Station | Cerbera | Top of Page | What's New | My Stuff




