Discussion
I bought some spray cleaning stuff today, as I thought it looked quite good as I was browsing the local motor factor's. It says that it cleans out air ways, fuel injectors, exhaust valves etc.
However, after getting it home and throwing all packaging away, I read that I have to spray the stuff into the 'air inlet system' after removing the air filter of course.
Any suggestions, as I'd like to give it a go to see if it's any good...
Surely I don't stand there spraying the stuff in through the nose of the car?
Cheers
MB
However, after getting it home and throwing all packaging away, I read that I have to spray the stuff into the 'air inlet system' after removing the air filter of course.
Any suggestions, as I'd like to give it a go to see if it's any good...
Surely I don't stand there spraying the stuff in through the nose of the car?
Cheers
MB
Yep, have heard of stuff that you just spray in the intake. If' I were you I'd either remove the puprple hoses and spray directly in each port or straight into the airboxes.
Can't really see that it will do a great deal. It's not going to clean the important parts of the injectors (nozzles) anyway. Might loosen some much of the backs of your vavles though.
Can't really see that it will do a great deal. It's not going to clean the important parts of the injectors (nozzles) anyway. Might loosen some much of the backs of your vavles though.
Gassing Station | Cerbera | Top of Page | What's New | My Stuff


