Discussion
A week or so ago the speedo decided to work very intermittently, then give up the ghost all together. Now it appears the milometer, odometer have packed in to. And to cap it all, the rev counter,. although working, tends to bounce all over the place when i hit the revs hard.
Is there a quick fix for this? i.e has something come loose behind the dash, or is a new 'module' required (i have had several of those in the past). Or, i recall it was once mentioned that these symptoms might suggest that the big fuse could be on its way out?
g
Is there a quick fix for this? i.e has something come loose behind the dash, or is a new 'module' required (i have had several of those in the past). Or, i recall it was once mentioned that these symptoms might suggest that the big fuse could be on its way out?
g
For the mileometer, remove speedo and gently prise open the bevel from the casing. You'll find if it's stuck at ?9,999 it will need help to wind over. You'll be able to wind it on by had once is open and jobs a good one!
The longer you leave this tick at the turn over point the worst it will get at high figure turn over. If this is the case do it tomorrow its well easy.
Si
The longer you leave this tick at the turn over point the worst it will get at high figure turn over. If this is the case do it tomorrow its well easy.
Si
Gassing Station | Cerbera | Top of Page | What's New | My Stuff



