Discussion
My current tyres are: 255/35/ZR/18 (Rear) and 225/35/ZR/18 (Front). I need to replace all four. The tyre chap says this is the wrong mix and the fronts should be 40s not 35s. He said there are two benefits. Firstly, the car would then have the same rolling circumpherence front and rear. Secondly, because this is the right setup the fronts will be more plentyful and cheaper.
The only problem I can see is that the outside diameter of the front would be a little larget that current and might hit the body.
I need some advice rather fast because I need to change the tyre for its MOT on Thursday.
The only problem I can see is that the outside diameter of the front would be a little larget that current and might hit the body.
I need some advice rather fast because I need to change the tyre for its MOT on Thursday.
i have just re shoed with toyo proxes had bridgstones before, you will get lots of advice from different people on various manufacturers its hores for courses really go with your own gut feelings after reading all replies, btw my tyres now stick like sh@t to a blanket after doing about 600 miles i was chucking round corners the weekend having plenty of fun
225/40 18 tyres were never fitted to the front of Cerberas by the factory. Having the 40 profile at the front might indeed give it the same rolling radius as the rear (but so what???) - more importantantly it will raise the front of the car thus reducing its rake; the rake being a critical factor in aerodynamic (i.e. high speed) stability.
The moral of the story: tyre outlets might know a lot about tyres but they don't necessarily know a lot about cars (especially the more specialist variety). Thank heavens for Pistonheads to help you get the RIGHT advice. P.S. T1-Rs are really very good in ultra-low profile form.
The moral of the story: tyre outlets might know a lot about tyres but they don't necessarily know a lot about cars (especially the more specialist variety). Thank heavens for Pistonheads to help you get the RIGHT advice. P.S. T1-Rs are really very good in ultra-low profile form.
Gassing Station | Cerbera | Top of Page | What's New | My Stuff




