Discussion
I stopped mine from squeeling by taking the pads out and cleaning the slot down the middle. Then chamfering the top edge, as the pads were slightly bigger than the disk and I think the ridge that wore was causing the squeeling along the rusty edge of the disk.
It doesn't squeal now - only the tyres
It doesn't squeal now - only the tyres

I sorted this problem on my other car a few weeks ago by putting vaseline (as stupid as it sounds) between the pads and the calipers instead of copper slip. It was my mate who's a mechanic that told me thats what they always use. I thought it would have melted off but seemed to do the trick.
many threads on this subject try a search. Ive heard many cures try anti squel shims behind the pads or silicone the pad to the cylinder. try a chamfer on the leading edge mine used to be terrible and the silicone cured mine but only temporary in the end i had to get new discs and pads so i got a brake upgrade from TCS and i havnt had any more problems.
satman said:
V8Cerbera said:
Okay - So I can't stop the squeel on these brakes - tried pads and disks.... what are the upgrade options?
Ring Leven...mine were disbolical...drove me almost insane, but Leven managed to cure it!I've heard of Focus RS brakes on Chimaeras before... wondered if there was a similar sort of common-road donor that could lend itself to worry-free braking in a Cerb.
Anti-squeal shims, coppaslip and other ideas like thin rubber pads on the rear face of the pads work because they change the resonant frequency of the braking system. I've been advised to try the thin rubber pads on the back of my car. Bought them ages ago... really must get on and fit them.
Gassing Station | Cerbera | Top of Page | What's New | My Stuff


