Clutch master cylinder change

[kevin63]

I have just changed my clutch master cylinder (spring broke in the last one), you would have thought they could have made it more tricky to change, NOT, I did it by myself which is not advised if anyone is thinking of doing it, took me about a hour and half, and with all skin intact too, the job would be alot easier with two people, and would have been a doddle if TVR had made the access hole twice as big, and bolts that you could access both sides.

[SI-PEN]

You obviously did it the hard way! I thought it was relatively easy, did mine from inside the car.

[kevin63]

Not the seals, they are easy, it was the whole cylinder. if there is an easy way then let us know just in case it goes again.

[BLUETHUNDER]

The way you did it is the only way.I went through the same process.

[kojak]

You should have rung me kev if you needed a hand.

[SI-PEN]

kevin63 said:

Not the seals, they are easy, it was the whole cylinder. if there is an easy way then let us know just in case it goes again.

Yes, changing the complete unit is a pig, sorry thought you meant seals!

Si