adjusting height with gaz golds

[AlVal]

Are gaz golds easily height adjustable?

I ask becausethe tyre choices I'm about to make may result in my overall diameter at the front staying original at 606mm, but the overall diameter at the back increasing from 624mm to 645mm, as such Im thinking if I do this, I may need to lower the height at the rear slightly to compensate - I've just had gaz golds fitted, so would the springs need changing at the back to lower it , or is the kit supposed to be somehow height adjustable?

[Sparky69]

The shockys have threaded bodys so raising and lowering the car is very easy. But I would watch what your doing cause if your lowering the car and raising the hieght of the tyre you might end up with rubbing issues! I think Im right in saying the rear sould be set higher anyway?

[AlVal]

thanks for the input, ill bear those factors in mind.

[InverCerb]

If you lower the Gaz Golds you'll lower the pre-load in the springs, hence why my car is about 10mm higher than i'd like it to be.