My door wont shut!
Discussion
Had a similiar problem with the passenger door on my Chim and assuming it's the same as the Cerb then try tightening the 3 allen screws around the receiving mechanism.....mine had come loose and the mechanism wouldn't catch the door when you try and close it. Make sure you don't overtighten them though as the plastic washers can split as I discovered 

blueyonder said:
Had a similiar problem with the passenger door on my Chim and assuming it's the same as the Cerb then try tightening the 3 allen screws around the receiving mechanism.....mine had come loose and the mechanism wouldn't catch the door when you try and close it. Make sure you don't overtighten them though as the plastic washers can split as I discovered 
Cheers fella
Tried that but no joy, i can move the mechanism further than the door does with a screw-driver and it still wont lock.
Try TVRPower http://www.tvrpower.co.uk/
or http://www.thetvrshop.com/
or http://tvrcarparts.com/pages/default.asp
Not sure how you get to the inside of the lock.
or http://www.thetvrshop.com/
or http://tvrcarparts.com/pages/default.asp
Not sure how you get to the inside of the lock.
Have you rang any of them?
Try breaker yards also..
http://www.douglasvalley.co.uk/
http://www.bellhillgarage.co.uk/
Try breaker yards also..
http://www.douglasvalley.co.uk/
http://www.bellhillgarage.co.uk/
Well i was on my way so the garage last night (having to hold my door shut!) and was almost there when i noticed that i wasn't having to put much effort into holing it shut for the past few miles, tried to push it open and the bloody thing had closed! I pulled over and it all works fine now!!
Think i must have a self healing cerbera!
Think i must have a self healing cerbera!
Gassing Station | Cerbera | Top of Page | What's New | My Stuff






