Blimey that was close and which gear can I see......
Discussion
Well, finally started on my repair of my bust gearbox.
Firstly I've decided to go for Andy Holden's Straight Cut Dog Box (cue the sniggers) to replace mine.
I had bought a complete 4.2 with a gearbox to replace mine with and to freshen up whilst it was out but what with Flat refit etc I just don't have the time or the funds. So that's back up for sake and the strip has begun.
I shuffled the car about under it's own steam to get it central in the garage, which was fun as at times it would just stop dead. After I'd finished I popped round the other side of the car to find a massive puddle of fuel!!! Now, Andy APM warned me that the hose was perished but 8 months after the service and about 700 miles it's let go. So make sure your lines are ok and if someone warns you about a line replace it there and then!!
Also while under the car I drained the gearbox oil and had a look in the box. Anyone know what gear is forwards of the drain hole? I don't know as I only appear to have chewed up metal there!
Firstly I've decided to go for Andy Holden's Straight Cut Dog Box (cue the sniggers) to replace mine.
I had bought a complete 4.2 with a gearbox to replace mine with and to freshen up whilst it was out but what with Flat refit etc I just don't have the time or the funds. So that's back up for sake and the strip has begun.
I shuffled the car about under it's own steam to get it central in the garage, which was fun as at times it would just stop dead. After I'd finished I popped round the other side of the car to find a massive puddle of fuel!!! Now, Andy APM warned me that the hose was perished but 8 months after the service and about 700 miles it's let go. So make sure your lines are ok and if someone warns you about a line replace it there and then!!

Also while under the car I drained the gearbox oil and had a look in the box. Anyone know what gear is forwards of the drain hole? I don't know as I only appear to have chewed up metal there!

Hi Matt
You really mean you've gone for Glebe's straight cut dog box
That does sound like a close one with the fuel pipe, presumably you weren't using the 'lit match method' of providing light to the scene!!
I've sent you a text but just in case you had no idea who it was from, I should be able to arrange to be about either Wed or Thurs afternoon if that works for you.
Kind regards
Andy
You really mean you've gone for Glebe's straight cut dog box

That does sound like a close one with the fuel pipe, presumably you weren't using the 'lit match method' of providing light to the scene!!
I've sent you a text but just in case you had no idea who it was from, I should be able to arrange to be about either Wed or Thurs afternoon if that works for you.
Kind regards
Andy
ridds said:
I think that might annoy me after a little while in the Cerb 
hahaha, I'm sure it won't be quite that loud in a car with an interior etc, it is still going to be loud though. Still, I don't drive mine a huge amount purely a weekend toy. Sounds fairly quite when off load though.
Windsor, no problem, will give me chance to have a poke around your very tidy machine at the same time.
Windsor, no problem, will give me chance to have a poke around your very tidy machine at the same time.

HarryW said:
ridds said:
I think that might annoy me after a little while in the Cerb 
Driver in the video was very good.
Regards
Tony
Edited by Tony 1234 on Wednesday 2nd January 11:08
Gassing Station | Cerbera | Top of Page | What's New | My Stuff





