TVR CERBREA 4.2 1996 INDICATOR FAULT

[PAULTIM]

I need help, i have a fault with the indicators which will not reset will only stay on right hand singal down or on hazards and is driving me mad. I have changed one relay unit behing the dash and an ECU for the indicators in the boot and still had the same fault. Any ideas would be a great help before i take a match to it. Many thanks to you tvr gurus!

[trooperiziz]

Check the ribbon cable underneath the steering wheel

[touching cloth]

Do you mean they won't stay on in one direction and won't autoturn off in the other? If so then there is a collar adjuster somewhere on the steering column under the dash I think. TBH I had the same but got it looked at when it went in for a service so didn't end up doing it myself.

[Budaholic]

IIRC there is a small PCB with optic sensors mounted near the steering column beneath the dash. There is a small metal disc with a cutout on the column that breaks the optic switches. Check that this is all in place and operating correctly.

HTH

Bud

[touching cloth]

Found a useful thread with pics

http://www.pistonheads.com/gassing/topic.asp?h=0&a...


OT: Hey Bud

[Budaholic]

touching cloth said:

Found a useful thread with pics

http://www.pistonheads.com/gassing/topic.asp?h=0&a...


OT: Hey Bud

Hi, TC Good to be back, even if I'm just a lurker here now.