Speedo not working
Discussion
Took the cerb out today, it's been in my garage for over a month so that I could waxoyle it. Finished that yesterday, so today gave her a good wash and polish, then out for a spin, well
me if the speedo didn't stop working after about 40 minutes, if I take the car up to what I estimate to be 70-80 the speedo flicks up and down. Is this BIG FUSE related or is it something someone else has experienced and knows how to fix?
me if the speedo didn't stop working after about 40 minutes, if I take the car up to what I estimate to be 70-80 the speedo flicks up and down. Is this BIG FUSE related or is it something someone else has experienced and knows how to fix?
Thanks for the advice guys, have checked the big fuse it looks OK. Have now lifted the car and checked the speed sensor I think, is this the speed sensor? I hope you can see the picture.
http://i219.photobucket.com/albums/cc273/crazymate...
this is the only thing that I can see that could be the speed sensor, it looks like a collection of magnets on a wheel with an inductive pick up, anyway I have given it a pretty good clean with a paintbrush and white spirit. I will take the car out again on Tuesday after I have waxoiled some of the bits I missed. Hopefully it will be ok.
http://i219.photobucket.com/albums/cc273/crazymate...
this is the only thing that I can see that could be the speed sensor, it looks like a collection of magnets on a wheel with an inductive pick up, anyway I have given it a pretty good clean with a paintbrush and white spirit. I will take the car out again on Tuesday after I have waxoiled some of the bits I missed. Hopefully it will be ok.
Just found this thread; http://www.pistonheads.com/gassing/topic.asp?h=0&a...
Edited by kevin63 on Monday 11th February 11:19
kevin63 said:
Just found this thread; http://www.pistonheads.com/gassing/topic.asp?h=0&a...
Thanks for that Kev, I think you just may have found the solution, I have cleaned the sensor, and checked the big fuse with no luck, I suspect that the sensor is duff and needs replacing.Edited by kevin63 on Monday 11th February 11:19

Gassing Station | Cerbera | Top of Page | What's New | My Stuff



