Dual oil/water dash gauge?

[Brummmie]

I've broke my capilary off at the sensor when fitting my latest bits and bobs, can you still get the original? or better still an electric sender with a mechanical oil pressure. Cheers

[JensenA]

Spa do a combined didgital Water Temp/Oil Presuure guage, you may to make up an adaptor for the water temp ender though - but you managed to swap a Cerb engine with an Ls1 - so you should be able to manage this

http://www.spa-uk.co.uk/design/dualgauges.asp

[CERBIE]

Got a couple of the SPA dials in my Cerb. They work well but as Alan says the oil pressure feeds off the capillary but I'm sure someone with more technical know how than me could adapt them to use an electronic send unit straight off the engine.

[Duke Thrust]

CERBIE said:

Got a couple of the SPA dials in my Cerb. They work well but as Alan says the oil pressure feeds off the capillary but I'm sure someone with more technical know how than me could adapt them to use an electronic send unit straight off the engine.

Oooooo! I like that!

[FUBAR]

Duke Thrust said:

CERBIE said:

Got a couple of the SPA dials in my Cerb. They work well but as Alan says the oil pressure feeds off the capillary but I'm sure someone with more technical know how than me could adapt them to use an electronic send unit straight off the engine.

Oooooo! I like that!

Me too

I was going to just get a digi oil temp one for where the clock is, but probably look a bit odd? All or nothing?

Is that an ACT carbon fibre pod/cowl I spy? Something else on my wish list, good to see one in situ

[Nickccc]

Cerbie, what functions do you have there?
I have had the clock taken out and the oil/ water one put in.

[carl_w]

How about something like this:


Available from http://www.demon-tweeks.co.uk/products/ProductDeta...

[Mars]

If you fancy single-function analogue clocks, Stack is about to release a set of 270degree stepper motor driven clocks. Although I like the Spa dual digital gauges (especially in the Cerb dash pictured - fabulous..!!), Spa doesn't do a fuel level gauge that I like (the one they do is a bdised fuel pressure gauge without a correct screen-printed fascia). Stack has a full set of gauges although being single-function, you'll need more mounting holes than the 3 traditionally available in the Cerb.

http://www.stackltd.com/instruments.html

[FUBAR]

OK, so where do I go for a non digi oil temp guage with yellow background, to go where the clock is?

[HarryW]

caerbont/speedycables or something like that

Check here http://www.caigauge.com/Customised_Vehicle_Instrum...

Edited by HarryW on Wednesday 20th February 13:16

[morebeanz]

I think you'd have to talk to the companies about colouring it. They're normally white or black, so it would be a special order...

[FUBAR]

HarryW said:

caerbont/speedycables or something like that

Check here http://www.caigauge.com/Customised_Vehicle_Instrum...

Edited by HarryW on Wednesday 20th February 13:16

Cheers Harry, Ive fired them off an email

[CERBIE]

It's a Carbon Cerbie pod with Leven stainless dash. The SPA gauges give Oil temp and pressure, fuel level & water temp, fuel pressure and voltage.

[big_treacle]

I've got an SPA oil pressure/water temp gauge in mine

Edited by big_treacle on Thursday 21st February 10:52

[shpub]

Brummmie said:

I've broke my capilary off at the sensor when fitting my latest bits and bobs, can you still get the original? or better still an electric sender with a mechanical oil pressure. Cheers

Speedy Cables just refurbed mine and replaced the broken temp sensor. £52.50 all in.

[TT Tim]

shpub said:

Brummmie said:

I've broke my capilary off at the sensor when fitting my latest bits and bobs, can you still get the original? or better still an electric sender with a mechanical oil pressure. Cheers

Speedy Cables just refurbed mine and replaced the broken temp sensor. £52.50 all in.

What was the turn round time Steve?

I need to get mine sorted, but want to do it between races.

Tim

[FUBAR]

FUBAR said:

HarryW said:

caerbont/speedycables or something like that

Check here http://www.caigauge.com/Customised_Vehicle_Instrum...

Edited by HarryW on Wednesday 20th February 13:16

Cheers Harry, Ive fired them off an email

Even more strange...I phoned this lot just now and they asked me if I wanted to speak to Speedy Cables?...Im guessing its all the same company?

Edited by FUBAR on Wednesday 27th February 10:31

[TT Tim]

FUBAR said:

FUBAR said:

HarryW said:

caerbont/speedycables or something like that

Check here http://www.caigauge.com/Customised_Vehicle_Instrum...

Edited by HarryW on Wednesday 20th February 13:16

Cheers Harry, Ive fired them off an email

Even more strange...I phoned this lot just now and they asked me if I wanted to speak to Speedy Cables?...Im guessing its all the same company?

Edited by FUBAR on Wednesday 27th February 10:31

[shpub]

TT Tim said:

I need to get mine sorted, but want to do it between races.

Tim

Took about 4 weeks.

[TT Tim]

shpub said:

TT Tim said:

I need to get mine sorted, but want to do it between races.

Tim

Took about 4 weeks.

Ta Steve,

Guess I better fit my spare in the mean time.

Tim