Oil catch pot
Oil catch pot
Author
Discussion

volospian

Original Poster:

494 posts

227 months

Friday 29th February 2008
quotequote all
The oil catch pot has a small hole, just under the air box. I assume something should be connected into that, but I can't see any loose pipes lying around anywhere looking for a home frown

I'm guessing it connects to a MAP sensor, or something?

longbow

1,610 posts

265 months

Friday 29th February 2008
quotequote all
I think its an overflow. Could be wrong.

julian64

14,325 posts

284 months

Friday 29th February 2008
quotequote all
Should be one big tube and one small tube connected

volospian

Original Poster:

494 posts

227 months

Friday 29th February 2008
quotequote all
Well, I have a big tube, connected to the engine breather, but I aint got nowt else frown

Any idea what it should be connected to? Maybe I can find the other end and trace where the pipe has gone.

mikesr

672 posts

261 months

Friday 29th February 2008
quotequote all
It should connect to a 4 way under the fuel regulator. Its usually routed down the V to the offside of alternator and aircon compressor.

ro_butler

795 posts

301 months

Friday 29th February 2008
quotequote all
Related question.

Has anyone fitted an aftermarket catchtank to replace the standard one? I don't fancy my airbox filling with oil at some point in the future.

TIA.

Rob.

volospian

Original Poster:

494 posts

227 months

Friday 29th February 2008
quotequote all
mikesr said:
It should connect to a 4 way under the fuel regulator. Its usually routed down the V to the offside of alternator and aircon compressor.
Cheers, I'll have a look later.... if it stops raining smile



ro_butler said:
Related question.

Has anyone fitted an aftermarket catchtank to replace the standard one? I don't fancy my airbox filling with oil at some point in the future.

TIA.

Rob.
I haven't, but I think a few others have. I was thinking about it, but haven't got around to it yet. Have a look here: http://www.pistonheads.co.uk/gassing/topic.asp?h=0... and here: http://www.pistonheads.co.uk/gassing/topic.asp?h=0...