Wiper park sensor

[SmokinV8]

Bol*ocks to it! Changing the wiper park sensor and got interupted so cant remember which order the red,blue and yellow cables go on. Help me please? I think it was from the top red,blue then yellow. Can anyone confirm please?

[kojak]

[SmokinV8]

Sorry Kojak, i meant the ones with the spade clips on.

[SmokinV8]

Does anyone know?

[Adrian@]

Blue on the end (edge end) yellow in the middle then Red (I will add, hopefully you set the wipers to the upright position with the ignition off so as to set the wiper off cam prior to fitting as you can break the new switch as you are fitting it). Adrian@
Edited...As I know that searches across to the griffith forum might read this be aware that the wipers WILL clash with the bonnet if ran whilst the bonnet is open.

Edited by Adrian@ on Tuesday 8th April 18:08

[SmokinV8]

Adrian@ said:

Blue on the end (edge end) yellow in the middle then Red (I will add, hopefully you set the wipers to the upright position with the ignition off so as to set the wiper off cam prior to fitting as you can break the new switch as you are fitting it). Adrian@

Thanks Adrian, just managed to find the info on the chim pages too. The wipers are in that position but by luck not judgement, I had no idea about that!

[Adrian@]

No problem, I sell the switches and find that without taking the switch off cam generally they get broken 1 in 5 times. Adrian@