Wheel bearing Kit
Discussion
Wheelbearings are integral in the hub, I didn't know there was a rebuild kit available.
Aftermarket hubs can be bought very cheaply from the US as they're used on a number of Jeeps.
What I do recommend, from personal experience, is that you replace the bolt holding the front hub together as a matter of course.
Ohhhhhh! Just looked on TCS site, what he's offering is NOT a wheelbearing, it's the location bolt that I mention above. I may have to investigate that further as mine 'worked loose' and it's not funny!
So, in summation, you will need the TCS Bolt AND a hub if you're replacing the bearing.
Good luck
Tim
Aftermarket hubs can be bought very cheaply from the US as they're used on a number of Jeeps.
What I do recommend, from personal experience, is that you replace the bolt holding the front hub together as a matter of course.
Ohhhhhh! Just looked on TCS site, what he's offering is NOT a wheelbearing, it's the location bolt that I mention above. I may have to investigate that further as mine 'worked loose' and it's not funny!
So, in summation, you will need the TCS Bolt AND a hub if you're replacing the bearing.
Good luck
Tim
Edited by TT Tim on Thursday 24th July 08:17
Gassing Station | Cerbera | Top of Page | What's New | My Stuff