*RGENT ADVISE NEEDED* Please! Clutch Fluid
Discussion
Remove the oval panel on the driver wing in the engine bay to reveal the clutch master cylinder. Usually a couple of screws and a load of silicone holding it in place. Top up with dot 4.0 or 5.1 brake fluid.
The panel will need sealing when it is put back.
Worth looking under the car for fluid leaks as it is usually the slave cylinder seals that go.
The panel will need sealing when it is put back.
Worth looking under the car for fluid leaks as it is usually the slave cylinder seals that go.
Gassing Station | Cerbera | Top of Page | What's New | My Stuff


