Wedding disaster
Discussion
sorry to go off topic but you mention the tvr logo on the spokes. can you get new ones or copies of these as mine are faded and barely noticeable, would like to bring them back to life.
If they are available you can have the wheel refurbed and apply a new transfer. however, if its only lacquer peel on the rim im sure they could rub that back and blend the lacquer in over the old stuff then cut it back.
If they are available you can have the wheel refurbed and apply a new transfer. however, if its only lacquer peel on the rim im sure they could rub that back and blend the lacquer in over the old stuff then cut it back.
Hard to say if £650 is expensive, without seeing the damage, but a Crack in Fibreglass needs repairing properly, any garage can do a cheap quick 'Fill and Paint job', so check that they are experienced in F'glass repairs.
Paint can easily be a £160 a litre, but a standard Metallic basecoat should be about £50 odd(and the same for the lacquer - plus thinners and hardener of course!).
Paint can easily be a £160 a litre, but a standard Metallic basecoat should be about £50 odd(and the same for the lacquer - plus thinners and hardener of course!).
Hi Craig.... Does sound slightly heavy... But has John told you which bit he intends to paint. I can't see him painting a 6" scratch. I'd imagine he's going to go back to XYZ to blend the new paint in for you.
Not sure what your stone chips are like, but if they're bad, it might be worth asking him for a price. I don't think he charges a lot more than that for a front end
Not sure what your stone chips are like, but if they're bad, it might be worth asking him for a price. I don't think he charges a lot more than that for a front end

Gassing Station | Cerbera | Top of Page | What's New | My Stuff


