Screeching starter motor repairs.
Screeching starter motor repairs.
Author
Discussion

ridds

Original Poster:

8,372 posts

273 months

Wednesday 29th April 2009
quotequote all
Here you go people.

If your starter screeches you need to replace this part.

Starter Gear

This is the Bendix with pre-engagement system as fitted to our starters.

Usually a bush with this unit collapses allowing the rear gear to spin without engaging on the flywheel.

It's a simple case of 4 small screws in the front plate that retain the unit in place. Remove, clean out old grease. Put some fresh in and then refit.

Ensure that the bolts are tight as if they fall out they fall into your clutch!

big_treacle

1,727 posts

289 months

Friday 19th June 2009
quotequote all
I just had this problem, found this thread, got the part and it worked!!! Genius. Saved me a whole heap of hassle. Cheers biggrin

Steve_T

6,356 posts

301 months

Friday 19th June 2009
quotequote all
Nice one Ridds, good link.

Ireland

3,517 posts

243 months

Friday 19th June 2009
quotequote all
Good link.

Probably worth adding it to the Equivalent Parts stickie.


Unfortunately it's a bit late for me as I replaced mine a few months ago.

Then again I could always refurb it .....

Demondad

486 posts

244 months

Saturday 20th June 2009
quotequote all
I heard people are changing the solenoids too. Any idea where you can get these?

ridds

Original Poster:

8,372 posts

273 months

Tuesday 25th August 2009
quotequote all
Bit of an update guys.

CCW now have a full service and Solenoids available for the starters.

Service

Solenoids


Gazzab

21,640 posts

311 months

Sunday 18th April 2010
quotequote all
Old thread but just ordered both parts - might do some DIY car stuff?!