oil hose from back centre of block to the drivers side wing?
Discussion
ah right, so switch for the light and the hose for the pressure reading.
it started last night and i had oil pressure woohooo. it was 65psi on cold and slowly dropped to 60psi after 7 minutes of idling. knocked it off then as my rad started to hiss. so i have to get that braised now.
I did try and restart it but the starter motor solenoid was just clicking. so thats the next fix for me now.
the starter was perfect before i took the car apart. could the clicking be due to a bad earth, too much heat, not enough earth? i dont feel it needs a refurb
it started last night and i had oil pressure woohooo. it was 65psi on cold and slowly dropped to 60psi after 7 minutes of idling. knocked it off then as my rad started to hiss. so i have to get that braised now.
I did try and restart it but the starter motor solenoid was just clicking. so thats the next fix for me now.
the starter was perfect before i took the car apart. could the clicking be due to a bad earth, too much heat, not enough earth? i dont feel it needs a refurb
Gassing Station | Cerbera | Top of Page | What's New | My Stuff


