Ignition control module - wiring help!!!

[rockwarrior25]

Just found the plug to the ignition control module (in the boot) of my 1998 4.2 had shorted and burnt the prongs. Any ideas of where i can get a wiring diagram?

Also, i'm assuming the permanent feed to this is the thicker red wire - does anyone know where I should trace this to as i think a fuse will have gone too.

excuse my ignorance - i'm new to all this!!!!

Ta! - Matt

[Byker28i]

Here you go, have a nose around here
http://homepage.ntlworld.com/dave.hinns/wiring.htm

[rockwarrior25]

ta! thats great!

God Bless Pistonheads - There'd be a lot less Cerbies without it!

[jcook.2007]

I have a range rover 3.5 V8, with an ignition module mounted to the distributor with three wires coming from it, ,one is brown and orange, one is brown and black and the third is brown and blue. which wires go to the plus and minus on the coil? and does the other wire go to earth or permenant live.

Hope someone will be able to help as i would like to get my landrover started.