Potential GROUP BUY - 4.2 front discs - who's interested ?

[Ireland]

Right, lets see who REALLY is interested in getting a new set of discs for the front of their 4.2's.

There is another thread running right now discussing the possible options of the how / what / who involved in getting them so please just keep this thread as a list of names.

1 - Ireland

2 -

[knight]

1 - Ireland

2 - knight

[Byker28i]

Me

knight said:

1 - Ireland

2 - knight
3 - Byker28i

[jammy_basturd]

1 - Ireland
2 - knight
3 - Byker28i
4 - Jammy



Just vented, and possibly grooved, not interested in cross-drilled.

[Erich Stahler]

jammy_basturd said:

1 - Ireland
2 - knight
3 - Byker28i
4 - Jammy
5 - Erich Stahler



Just vented, and possibly grooved, not interested in cross-drilled.

[Allandwf]

Erich Stahler said:

jammy_basturd said:

1 - Ireland
2 - knight
3 - Byker28i
4 - Jammy
5 - Erich Stahler
6 - Allandwf


Just vented, and possibly grooved, not interested in cross-drilled.

[Erich Stahler]

Allandwf said:

Erich Stahler said:

jammy_basturd said:

1 - Ireland
2 - knight
3 - Byker28i
4 - Jammy
5 - Erich Stahler - Ideally grooved or 'J' hooked but not cross drilled.
6 - Allandwf


Just vented, and possibly grooved, not interested in cross-drilled.

[anonymous-user]

Erich Stahler said:

Allandwf said:

Erich Stahler said:

jammy_basturd said:

1 - Ireland
2 - knight
3 - Byker28i
4 - Jammy
5 - Erich Stahler - Ideally grooved or 'J' hooked but not cross drilled.
6 - Allandwf
7 - Bandit


Just vented, and possibly grooved, not interested in cross-drilled.

I'm interested - tell me more.

[TT Tim]

I'm interested but I'm really after HUGE disks ala Brummie.

Tim

[GTti]

I would be interested in a pair.

[plumAJP]

im interested in a pair too. vented and groved please.

any idea on price yet? under a certain figure!!!

[RichV6]

I'm interested, would prefer to go to 304mm and space the standard
caliper. Are you looking at seperate bells?

[plumAJP]

i thought we were going for one peice discs?

[Ireland]

1 - Ireland
2 - knight
3 - Byker28i
4 - Jammy
5 - Erich Stahler - Ideally grooved or 'J' hooked but not cross drilled.
6 - Allandwf
7 - Bandit
8 - TT Tim
9 - GTti
10 - plumAJP
11 - RichV6


There's no idea of a source yet let alone a price.

There have been so many "almost" threads about them but we never actually got anywhere.

This thread is just to gauge interest.

The other "discs" one is where the discussion is going on.

Surely if we can source a supplier then we will have options (smooth / grooved / drilled / one-piece / two-piece / etc).

[plumAJP]

if we can get a source for plain discs with no holes for bolts/studs then i have a machinist that will drill stud holes in them for us and groove, drill, engrave etc.

[Demondad]

1 - Ireland
2 - knight
3 - Byker28i
4 - Jammy
5 - Erich Stahler - Ideally grooved or 'J' hooked but not cross drilled.
6 - Allandwf
7 - Bandit
8 - TT Tim
9 - GTti
10 - plumAJP
11 - RichV6
12 - Demondad

How about rear discs too!

[pole]

IM IN.

[Byker28i]

Demondad said:

How about rear discs too!

If you're desperate there's a set on ebay
http://cgi.ebay.co.uk/TVR-Cerbera-Tuscan-Rear-brak...

[Ireland]

1 - Ireland
2 - knight
3 - Byker28i
4 - Jammy
5 - Erich Stahler - Ideally grooved or 'J' hooked but not cross drilled.
6 - Allandwf
7 - Bandit
8 - TT Tim
9 - GTti
10 - plumAJP
11 - RichV6
12 - Demondad
13 - pole

[cerbieboy]

1 - Ireland
2 - knight
3 - Byker28i
4 - Jammy
5 - Erich Stahler - Ideally grooved or 'J' hooked but not cross drilled.
6 - Allandwf
7 - Bandit
8 - TT Tim
9 - GTti
10 - plumAJP
11 - RichV6
12 - Demondad
13 - pole
14 - cerbieboy (if fit an s6)?