Clutch master cylinder springs.

[high52kojak]

Managed to aquire some spare springs for the master today, as these tend to go fairly often I thought it would be wise to keep a few handy.
When I took my old cylinder apart the spring broke in my hands, bit of a weak point really.
Seal kit for 11 quid and a spring for pence and my old master will be as good as new.

[Ireland]

Part numbers ?????

[plumAJP]

yes please, interested in the a spring and new seals if they are only a few quid,may aswell see how long they last instead of buying a new master

[high52kojak]

http://www.merlinmotorsport.co.uk/p568/MASTER-CYLI...
Link for the seal kit.

I got the springs through work, they were from BTP - Bearing Transmission + Pneumatics ltd in Derby, they measured my old broken one to get the sizes. I'll try and get a part number later

[travelling_man]

bump!

any look with the part numbers for the springs?

[plumAJP]

bump.. springs fella.

just go back to the place you got yours and get 5 of them. i want one, travelling man wants one and i bet others will. we will give you a few quid for doing it too.

[high52kojak]

Yep I am on the case, the guy I got them off is proving hard to find, should see him tomorrow aft though, as soon as I get some I'll let you know and get some in the post, no worries.

[travelling_man]

bump

any luck

i've got a cylinder which i would like to refurb as a spare
in fact i've got 3

[high52kojak]

Update, bit of an issue with the new springs, when I tried to put one in the cylinder it turns out the internal diameter was 0.5mm too big. So I have managed to find a stainless one of the same sizes and have some on order, when they arrive I'll try it in my old unit and post results on here along with part number and internet link. Fingers crossed they will be correct.

[travelling_man]

good man

[high52kojak]

Springs arrived today!!
Have tryed one in my old unit and it fits a treat, have not tried it on the car but I see no reason why it wouldn't work. They are stainless steel so hopefully a better quality than the st steel used as standard.
I have one spare so if anyone wants it they can for a fiver posted.
I paid £17 for three due to high postage costs from spring supplier.

Part number:Co6000593000 S/S

Link: http://www.assocspring.co.uk/_compspr.asp?suffix=S...