Early Door Loom versus Later Door Loom Help

[Juddder]

Hi everyone

I have a replacement later version drivers door on my car which I have mapped to the wiring diagram of the early version drivers door it replaced.

As I have both looms, and the colour wires on each are identical, even though the -> car plugs are different, has anyone tried this operation before where I am going to remove the plugs on the newer loom, and remap the pins to the plugs on earlier loom?

I've including the mappings of both looms below for reference and has anyone got any adivce as to HOW to get the pins out the back of the plugs without trashing them, as they seem quite persistant so-and-sos!

Many thanks

Alex

Later Door Loom

1. Blue Plug (view from back with notch at top)

black [B], n/a, white/purple [WP]

yellow/black [YB], orange [O], orange/white [OW]

2. Black Plug (view from back with notch at top)

yellow/green [YG], n/a, blue/orange [UO]

grey [S], light green [LTG], black/red [BR]

3. White Plug (view from back with notch at top)

dark/green [G], n/a, red/white [RW]

blue/yellow [UY], grey/black [SB], black [B]

Early Door Loom

1. Small 3 pin plug

1 - red/white [RW]
2 - grey [S]
3 - grey/black [SB]

2. Large plug

1 - black [B]
2 - white/purple [WP]
3 - orange/white [OW]
4 - orange [O]
5 - yellow/black [YB]
6 - yellow/green [YG]
7 - blue/orange [UO]
8 - black/red [BR]
9 - light green [LTG]
10 - grey [S]
11 - blue/yellow [UY]
12 - dark green [G]