4.5 Brake bell measurement needed urgently

[markh1]

Hi all,

With all the little bits I have had to order for my car I have forgotten the brake disks. I am ordering some from CompBrake and the only measurement I am missing is the measurement accross the bell. I think it is 8 inches? Please can someone confirm this so i can get some ordered today.

Cheers,

Mark

[markh1]

I am going to hold my horses and see how big a disk I can fit into the calipers before I order any so panic over

[Steve_T]

The standard bell is 7" PCD for the mounting bolts and the biggest disc you can attach to these that will fit in the calipers is a 330. You'll need a bell with an 8" PCD to go up to 355 or 362mm discs (and 6 pots), these look like they'd squeeze inside RL7s from the clearances I have around my 330 setup ...