Cerb Parts wanted...
Discussion
Hi Guys,
I'm looking for a few items for my 1996 Cerbera 4.2 could any one help... Money is waiting for right parts
first part i'm after is the Fog Light switch... I'm after just the knob but i'll buy the whole thing if need be. its the alloy Knob one on the right hand side of the steering wheel.
The next thing I'm after is the 2 rubber buttons that the bonnet sit on... They are situated in 2 holes in the middle so the bonnet rests on them...
Next thing is the big one!!! On the drivers side door glued to the door card there are rubber bits that presses on the door seal (hinge end) and one on the back end (lock end) My door cards missing them and its letting water in because of it....
Money waiting guys
Cheers
Jack
I'm looking for a few items for my 1996 Cerbera 4.2 could any one help... Money is waiting for right parts
first part i'm after is the Fog Light switch... I'm after just the knob but i'll buy the whole thing if need be. its the alloy Knob one on the right hand side of the steering wheel.
The next thing I'm after is the 2 rubber buttons that the bonnet sit on... They are situated in 2 holes in the middle so the bonnet rests on them...
Next thing is the big one!!! On the drivers side door glued to the door card there are rubber bits that presses on the door seal (hinge end) and one on the back end (lock end) My door cards missing them and its letting water in because of it....
Money waiting guys
Cheers
Jack
Any one got a picture of the bobbin things??? with size i think i could match something similar up.
I'm thinking its something like this
http://www.polymax.co.uk/Catalogue%20Product%20Pag...
Jack
I'm thinking its something like this
http://www.polymax.co.uk/Catalogue%20Product%20Pag...
Jack
Edited by Jackal83 on Sunday 25th October 17:09
Tanguero said:
The usual suppliers have all these off the shelf. Clever Trevor, Racetech, TVR Power etc (in no particular order)
Ditto - and try a breakers for the Fog light switch. Do you mean the triangle type bits of rubber at the top leading edge of the door Card? If you do, then just take the old one off and re-glue it with some Silicone Adhesive.Here you can find therubber parts on the internet:
http://www.tvrshop.com/product-subsection-detail.a...
http://www.tvrshop.com/product-subsection-detail.a...
Gassing Station | Cerbera | Top of Page | What's New | My Stuff


