exhaust adjustment
exhaust adjustment
Author
Discussion

prettyboyben

Original Poster:

170 posts

209 months

Monday 7th December 2009
quotequote all
sorry if this has been asked many times before, but how easy is it to adjust the height of the exhausts cos my right hand side pipe is hanging annoyingly lower than the left. no testicle jokes please. its doin my nut in tho cos its lop sided from the back.

Ireland

3,517 posts

244 months

Tuesday 8th December 2009
quotequote all
What exhaust have you got on your car?

Standard or sports?

prettyboyben

Original Poster:

170 posts

209 months

Tuesday 8th December 2009
quotequote all
just standard i believe. i havent actually checked. haha! only had the car about six months and never looked. does it make a difference?

Allandwf

1,773 posts

225 months

Tuesday 8th December 2009
quotequote all
There are adjustment nuts at each hanger at the back, but only allow for slight movement, you can also put a large cable tie round the rubber mount and pull it in , until the tailpipe is at the right hight.
When mine was like this it was, however, that the exhaust had slipped out of the rubber mount at the back.

Ireland

3,517 posts

244 months

Tuesday 8th December 2009
quotequote all
prettyboyben said:
just standard i believe. i havent actually checked. ..... does it make a difference?
Yeah, the standard ones are a bit more difficult to get level.

It may be just a case of one of the rubber mounts needs to be replaced.

You'll really need to get a look under the car and see what exact set-up is on yours.

Either way it's not particularly difficult, just fiddly.


Time to find a mate with a lift / pit, methinks.

Tanguero

4,535 posts

231 months

Tuesday 8th December 2009
quotequote all
Big jubilee clip round the outside of the rubber so you can adjust it fairly precisely with a spanner....

prettyboyben

Original Poster:

170 posts

209 months

Tuesday 8th December 2009
quotequote all
wicked, cheers guys. my dads mates got a pit so im gonna have to try n get it up there at some point. have a go at a bit of rust removal work whilst im there i think. haha.

cerbieboy

292 posts

237 months

Tuesday 8th December 2009
quotequote all
Tanguero said:
Big jubilee clip round the outside of the rubber so you can adjust it fairly precisely with a spanner....
that's what i am doing today

brakedust

1,059 posts

239 months

Tuesday 8th December 2009
quotequote all
If you slacken off the 4 bolts holding your rear section to the cats (2 per side) you can rotate the exhaust, which in turn adjusts the height at the rear.....