Does anyone know which of the 3 connectors on the back of the speedo goes to what.I'm helping someone put a tvr engine and cerbera intruments into a sylva phoenix kitcar.I assume there is supposed to be a sensor on the propshaft. Is this correct.Many thanks for any help
Don't know about the connectors on the speedo, but the sensor is mounted on a bracket on the back of the diff reading off the grooves in one of the driveshafts
I'm not sure, but if one of the wires is grey (0.5 size), then I think this one goes to the speed sensor. Might go into pin 2 of a 24 way dashboard connector. This may then go to a 36 way connector (pin26).. behind the rear seats!!!!
Many thanks for your help-much appreciated.Now, I'll have to sort out a TVR sensor onto a Granada driveshaft!!
Gassing Station | Cerbera | Top of Page | What's New | My Stuff
