Lamda

[nakedguy]

Right I plugged in the laptop and when going through the throttle range one of my lamda sensors goes up to 1.5v and the other stays on 0v. This might explain my mil light doing my head in. I'm thinking that the lamda might have got fried when hammering it because the cats aren't there.
Any thoughts?

Before I start taking the protection plates off the underside, there is the lamda fitted? I'm assuming it's just aft of where the cats would be

Cheers

[stuthemong]

before the cats. but to get to them you'd need to take the decats out, which probably means takign the underbelly off...

[nakedguy]

Nightmare, thanks

[itiejim]

You don't need to take the cats (or replacement pipes) off on the V8, don't know about the six though.

[nakedguy]

It's the 6 vie got

[Quentin1]

No need here either. You can get the lambdas out, with the cats in place. It is toght though...

Björn.

Edited by Quentin1 on Thursday 12th August 19:56