Discussion
denyer00 said:
Trying to get in the car this morning, am I getting in? Not a chance!
I've poured warm water all over the door and windows seals but it still won't open, I take it this a common problem on a Cerb.
Any suggestions?
Kev is your man for this..his lives outside so must be an expert at getting inI've poured warm water all over the door and windows seals but it still won't open, I take it this a common problem on a Cerb.
Any suggestions?
If you are desperate to get in then I pour Luke warm water over the brush type seals that run along the base of the window, then I run a credit card thin piece of plastic all the way along the brush to make sure the window has not bonded to the brushes. Once done just do a visual on the window seals to make sure they look free from ice, if there is evedence of ice then run something around the seals in-between the glass and seal.
This has worked for me with 10years on ownership but where ever possible in these conditions I leave it alone and plugged in to the Accumate.

This has worked for me with 10years on ownership but where ever possible in these conditions I leave it alone and plugged in to the Accumate.

Edited by kevin63 on Sunday 28th November 11:00
Cheers for the quick replies, I've just managed to get in, passenger side first then I opened drivers side from the inside.
However I think my battery has died as it's turning over VERY slowly, I've got a charger so will probably take the battery out and charge, is there anything I need to be aware of before I take it out?
However I think my battery has died as it's turning over VERY slowly, I've got a charger so will probably take the battery out and charge, is there anything I need to be aware of before I take it out?
Gassing Station | Cerbera | Top of Page | What's New | My Stuff


