door card~~~~~what oil

[kirknisbet]

is it easy enough to remove door trim as i want to get in and check micro switch as when i open door window does not drop and grease window runners what has to be removed to get into it any pictures anyone




what oil would you put in as goin to drop it for some fresh and put lucas oil stabliser in aswell

[steviejasp]

Yes its no problem. There are about 7 cap screws around the door holding the inner panel on.

Edited by steviejasp on Monday 21st March 20:25

[spongy]

Ilooked at this the weekend fixings are really easy to see,going to address my slow drivers window soon,passengers side shuts with a clunk and speed,drivers side isgoing to put new felt in runners spray with silicon,and check the good ole wires in there

[FUBAR]

spongy said:

Ilooked at this the weekend fixings are really easy to see,going to address my slow drivers window soon,passengers side shuts with a clunk and speed,drivers side isgoing to put new felt in runners spray with silicon,and check the good ole wires in there

Toni, over the years I've tried most of the quick fixes for the not so quick driver's window. In the end I (well, OK, Austec did) replaced the door wiring and now I have a driver's window suitably speedy for a 195mph car I'd lay money the wiring is the answer.

[spongy]

Cheers bud was going to check this,still going to put new felt in etc