Falkens or Toyo's!?
Discussion
Just one word of warning re the Falken 452's
Had them all round on my pokey 3 series a couple of years back, as previously mentioned the rubber does harden pretty quickly in colder weather. More importantly like a lot of TVR's my Bimma stood around in the garage a lot as I don't drive often living in London.....both fronts (225 35 R18's) developed circumferential cracking to the inside tyre wall, ie where u cant see it.....was told this was a pretty nasty fault with the tyre by local Bimma garage and to change asap. I only pootle round urban roads in the main, so not "spirited" by any means....just maybe worth you guys with 452's checking....
S
Had them all round on my pokey 3 series a couple of years back, as previously mentioned the rubber does harden pretty quickly in colder weather. More importantly like a lot of TVR's my Bimma stood around in the garage a lot as I don't drive often living in London.....both fronts (225 35 R18's) developed circumferential cracking to the inside tyre wall, ie where u cant see it.....was told this was a pretty nasty fault with the tyre by local Bimma garage and to change asap. I only pootle round urban roads in the main, so not "spirited" by any means....just maybe worth you guys with 452's checking....
S
Marto303 said:
grahamn said:
I use falkens on mine and have no problems with them. I wouldn't use them on track, but for normal/spirited road driving they are fine.
Are they the 452's graham ?They are 452's. On my second set, no problems with inner wall cracking or losing grip. I know quite a few Tivers use 452's and most seem to like them. As I said not as good as Toyo's, but for normal road driving they are alright. And at about £25 a corner cheaper.
grahamn said:
They are 452's. On my second set, no problems with inner wall cracking or losing grip. I know quite a few Tivers use 452's and most seem to like them. As I said not as good as Toyo's, but for normal road driving they are alright. And at about £25 a corner cheaper.
Thats good to hear as I've just bought a set for my cerb, hav'nt used them yet though, I'm still waitting for my caliper to come back from the engineering shop but should be back on the road for the weekend, i'll give a better opinion then.Martin
Gassing Station | Cerbera | Top of Page | What's New | My Stuff




