smaller diam MOMO steering wheel to an early non airbag 355

[carspath]

as per the title, i am hoping to fit a smaller diameter MOMO steering wheel to my very early 1994 355gtb

i am aware that hill engineering do a replacement boss for the airbagged steering wheel, but not for the non-airbag wheel

has anyone managed to replace a non-airbagged 355 steering wheel, and if so, where did you get the replacement boss from?

[johnnyreggae]

Your car should have the standard 6 bolt Momo pattern already I think so no adapter is needed

[AndrewW-G]

johnnyreggae said:

Your car should have the standard 6 bolt Momo pattern already I think so no adapter is needed

only reason for a new boss would be if you wanted the steering wheel nearer

[Mario149]

AndrewW-G said:

only reason for a new boss would be if you wanted the steering wheel nearer

....which is def worth considering as it improves the driving position for a lot of people. I had to put a new boss on for my steering wheel, but put a spacer in there while I was at it

[carspath]

i think that the original 2.7 non-airbagged steering wheel is attached with 4 bolts at the far end(dashboard end)

has anyone actually replaced a non-airbagged 355 steering wheel?---and if so i would be grateful for a detailed description

the later air-bagged wheels appear more easy to replace , as there is a momo boss available

[AndrewW-G]

carspath said:

i think that the original 2.7 non-airbagged steering wheel is attached with 4 bolts at the far end(dashboard end)

http://www.pistonheads.com/gassing/topic.asp?t=1006453