NA V12 Power limits
NA V12 Power limits
Author
Discussion

Lambo FirstBlood

Original Poster:

1,001 posts

210 months

Tuesday 27th March 2012
quotequote all
Here's one for those of you that know a lot more about engineering than me. In the current climate of more and more manufacturers looking to forced induction to get the power up and the CO2 down, we are still seeing brand new amazingly high powered normally aspirated V12 engines.

The Aventador has 700bhp and the F12 will have an astonishing 740bhp. These are both brand new cars at the beginning of their production cycles so we will almost certainly see higher powered versions from both of them in the coming years. Could the SV or the GTO versions of these cars have 800 bhp?

My question is, is there a limit to what can be done with a NA engine without ridiculous displacement (say keeping it under 7 litres). What are the limitations? Is 800bhp doable, what about 900? 1000?


jontysafe

2,370 posts

209 months

Tuesday 27th March 2012
quotequote all
I suppose the only limitation would be driveability, reliability and longevity. Bit of a boring answer I know.

We already know we can get close to 1000bhp or maybe more from a F1 V10, what were they 3 litre? Not much good on the queen`s highway though. I have a sneaking suspicion we`re pretty close to what we can feasibly do on the road retaining the three aforementioned attributes. That`s probably been said many times before though, the difference being, I would LOVE to be proved wrong!

Streetrod

6,484 posts

237 months

Tuesday 27th March 2012
quotequote all
Interesting question. The recent rise of the high powered NA V12 is down to manly to one thing, and that is efficiency. The rise in coating technologies has allowed manufactures to reduce the internal friction in engines by up to 25% in some cases. Add in the introduction of very high pressure fuel injection systems (Over 2000 psi) coupled with computer controlled ignition systems has allowed the engineers to optimise the combustion sequence. Add the fact that real money is now spent on the exhaust cycle has allowed these engines to pump out these numbers. And lets not forget internal weight reduction bings huge benifits. Also these engines are now built to near F1 standards of tolerance (Or blue printing as it was called in my drag racing days)

But the problems with these engines are that they are very expensive to build, so the power to pound ratio makes them uneconomical to be used in anything but your top end model.

As to how much more power they can produce, well as had been said I think we are close to the limit to what can be produced for a reasonable cost. Exotic metals etc will allow you to push things even further but durability with eventually take its toll.

You can add capacity and higher rev ranges but again you would need to invest in exotic materials and again durability will suffer

AJSG

327 posts

218 months

Wednesday 28th March 2012
quotequote all
jontysafe said:
I suppose the only limitation would be driveability,
Absolutely, in fact the limiting issue is the gearbox not the engine. If F1 returned to being a technology innovator rather than the gayery its involved in now we would probably have really interesting constantly variable transmissions by now.

You could design a very efficient engine that runs at a constant rev, then deal with the acceleration via the gearbox, which would mean vastly higher outputs per litre.