Bloody Testarossa rear tyres, AGAIN!
Bloody Testarossa rear tyres, AGAIN!
Author
Discussion

burriana

Original Poster:

16,556 posts

285 months

Saturday 31st March 2012
quotequote all
After about six weeks trying to find a pair of rears earlier this year (apart from the absolute rip off £400 a corner Michelins), I found a pair of Goodyear F1s (my preferred option).

Been without the car for seven weeks whilst it has been hibernating and, having a major service plus several other bits and pieces sorted out in preparation for its Italy trip after the LM Classic in July...

Picked it up this morning, brilliant, God it's fast. Went out to give it a wash...

Flat as a pancake



Not one but two nails, plus a cut rendered the tyre irrepairable. So now I have another six or seven week job trying to find another one or two rear tyres.

If anyone knows of any 255/50/16s hiding anywhere, please let me know. And I'll take a bag of that rocking horse s!!t too please!

I ask you!



At least I now know what it looks like with anthracite wheels:


yellowtr

1,190 posts

257 months

Saturday 31st March 2012
quotequote all
Good luck mate, they are proper rocking horse poo to find frown

I don't even think you can get the ones I got anymore (and I got them from the US!).

360 wheels could be the option (although I love the TR wheels).

steven f

538 posts

231 months

Saturday 31st March 2012
quotequote all
that will repair al fetch it here i will get it done for you

yellowtr

1,190 posts

257 months

Saturday 31st March 2012
quotequote all
Al,

I am on the case for you with a contact of mine, will get back to you.

yetie

377 posts

238 months

Saturday 31st March 2012
quotequote all
Wow...is that what tread looks like biggrin... i didn't get any of that when i bought my car grumpy

V6Alfisti

3,314 posts

258 months

Saturday 31st March 2012
quotequote all
You can get most "irrepairable" tyres fixed using the full fat vulcanising tyre repair system.

Process takes about 6-7 hours from memory and they actually melt in new rubber to the damage so it becomes one.

These are the guys that did a tyre for me a few years ago. I would suggest that if these guys can't fix it and be happy about doing it, then no-one will (and you certainly wouldn't want anyone trying it if Meridian say it can't be done safely).

http://www.meridiantyrerepairs.co.uk/

Edited by V6Alfisti on Saturday 31st March 23:20

Tuvra

7,927 posts

256 months

Saturday 31st March 2012
quotequote all
yetie said:
Wow...is that what tread looks like biggrin... i didn't get any of that when i bought my car grumpy
TUSCANEER?!?!? Your up mate.....

Yetski

701 posts

194 months

Sunday 1st April 2012
quotequote all
yetie said:
Wow...is that what tread looks like biggrin... i didn't get any of that when i bought my car grumpy
OMFG not again
rolleyes

jhoneyball

1,802 posts

307 months

Sunday 1st April 2012
quotequote all
255/50/16 is what my late 80s Xpack Aston Martin V8 Vantage takes.

the impossibility of getting them made me get some 18" wheels made up for the car so i could use modern rubber

try astonmartin works service and a few of the larger heritage dealers. they might have some michelin pilot sports in that size

jon

70proof

6,158 posts

186 months

Sunday 1st April 2012
quotequote all
burriana said:
Not one but two nails, plus a cut rendered the tyre irrepairable. So now I have another six or seven week job trying to find another one or two rear tyres.
yikes, not one but two, that is bad luck....

AndrewW-G

11,968 posts

248 months

Sunday 1st April 2012
quotequote all
I know they are more track orientated, but Demon Tweeks have/had the correct size R888s on the shelf in Wrexham for ~£220 a corner


ETA

http://www.demon-tweeks.co.uk/performance/track-da...

Edited by AndrewW-G on Sunday 1st April 19:38

VinceFox

20,566 posts

203 months

Sunday 1st April 2012
quotequote all
Can i just say, of all the supercars out there this is the one that still leaves me the most in awe. Far as im concerned that thing is a four wheeled rock star.


yellowtr

1,190 posts

257 months

Sunday 1st April 2012
quotequote all
AndrewW-G said:
I know they are more track orientated, but Demon Tweeks have/had the correct size R888s on the shelf in Wrexham for ~£220 a corner


ETA

http://www.demon-tweeks.co.uk/performance/track-da...

Edited by AndrewW-G on Sunday 1st April 19:38
Not suitable for the TR as the width of the tyre isn't suitable and also they are not brilliant in the rain.

Chas88

630 posts

197 months

Sunday 1st April 2012
quotequote all
burriana said:
Sorry but this picture made me laugh, it looks so odd with the spacesaver. laugh

Pommygranite

14,472 posts

247 months

Monday 2nd April 2012
quotequote all
Www.tirerack.com - import from the USA - a few here in oz have used them (not for fezzes mind) and the company is legit and recommended.

burriana

Original Poster:

16,556 posts

285 months

Monday 2nd April 2012
quotequote all
Thanks for all the replies guys. Well, apart from one that is rolleyes

I spent the rest of the weekend calming down, resigned to the fact that I am probably looking at £800 plus going into certain French coffers for a pair of new Michelins.

Those might be what Aston vintage use Jon.

I will have a quick look on all the usual channels here and the States same as I did two months ago, but I don't hold out much hope.

If I could get a set of 512 TR wheels for a Grand I would. Not sure if the 360 wheels would look right. They just about looked ok on my 348 but the TR is a whole different look.

Pete, do you know anyone who has run 888s? I know Del uses them on his Griff and has done for years and, I wanted a set on the 348. Not sure about using them on a Testarossa though. I thought they did come in a suitable size?

Thanks for the vulcanizing tip Matthew. Not really sure how that works but, with two nails and a cut, is it worth it?

Right - Google - search - tyres.... (I may be some time)





burriana

Original Poster:

16,556 posts

285 months

Monday 2nd April 2012
quotequote all
yetie said:
Wow...is that what tread looks like biggrin... i didn't get any of that when i bought my car grumpy
Kevin - stop moaning, man up, chalk it up to experience and move on.

burriana

Original Poster:

16,556 posts

285 months

Monday 2nd April 2012
quotequote all
steven f said:
that will repair al fetch it here i will get it done for you
Hello Fitzy - I think with three areas for repair I'd rather get another tyre. High speed on the French and Italian motorways and coming down some of those Alpine passes, I wouldn't be really comfortable with three repairs.


V6Alfisti

3,314 posts

258 months

Monday 2nd April 2012
quotequote all
burriana said:
Thanks for the vulcanizing tip Matthew. Not really sure how that works but, with two nails and a cut, is it worth it?
Three areas may be a bit much but sometimes I find it good to take a step back. The process as I understand renders the tyre as good as new but our heads say "3 repairs = too much".

I think a lot depends on the location and size of the puncturse/cut, personally I would give Meridian a call, give them the details and see what their assessment is (you might need to send pictures given your distance). Even if you keep it as a good spare and not the long haul trips.

yellowtr

1,190 posts

257 months

Monday 2nd April 2012
quotequote all
burriana said:
Thanks for all the replies guys. Well, apart from one that is rolleyes

I spent the rest of the weekend calming down, resigned to the fact that I am probably looking at £800 plus going into certain French coffers for a pair of new Michelins.

Those might be what Aston vintage use Jon.

I will have a quick look on all the usual channels here and the States same as I did two months ago, but I don't hold out much hope.

If I could get a set of 512 TR wheels for a Grand I would. Not sure if the 360 wheels would look right. They just about looked ok on my 348 but the TR is a whole different look.

Pete, do you know anyone who has run 888s? I know Del uses them on his Griff and has done for years and, I wanted a set on the 348. Not sure about using them on a Testarossa though. I thought they did come in a suitable size?

Thanks for the vulcanizing tip Matthew. Not really sure how that works but, with two nails and a cut, is it worth it?

Right - Google - search - tyres.... (I may be some time)
Hi mate,

I spoke to the lead tech guy at Toyo and he said the rim was 1 inch to wide for the tyre to be mounted on it, so to me it was a non starter. Shame really. Try http://www.eurovettes.com/contact_about.htm as this is where I got mine from.

Good luck!