355 Owner ......... more thoughts
355 Owner ......... more thoughts
Author
Discussion

TISPKJ

Original Poster:

3,780 posts

238 months

Monday 2nd April 2012
quotequote all
http://www.pistonheads.com/gassing/topic.asp?h=0&a...

http://www.pistonheads.com/gassing/topic.asp?h=0&a...

Hi Guys, just a follow up to my other threads above on 355 ownership so far for those that like to follow this type of thing or for anyone thinking of taking the plunge via research on these forums.

So as expected cars not done a lot since my last related post, managed to pick up a new genuine ferrari cover with bag etc on ebay for a good price, its actually for a 360 but has no problems and will fit the CS one day as well :-)
Also picked up an ipod connector lead from Becker over winter so thats all wired in now, spent ages thinking where to mount the ipod and eventually went for one of those flexibal phone holders that stick to the screen from halfords for circa £15, didnt like the screen idea so have stuck an alloy plate under the dash just under the radio and the sucker thing mounts there then flexi arm comes out so ipod is just to the left of the radio, looks neat and only idea can think of for now without hacking the car about which I dont want to do.
Had the car on a trickle charger all winter, just want to say what a splendid idea to mount the battery in the front wing, so easy to get to to attach the trickle charger leads ... Not !
I did pick up a quicksilver exhaust late last year and they seem to sound fine, but they do have a bit of a drone at cruising speeds and around town, fit and finish are ok, tailpipes look good,at this time I was still looking for a Capristo or Tubi at the right price.
I drove the car over the winter period as much as I could to warm up when the weather was fine and we had no salt down, intention was to service the car and then fix whatever faults came up over the winter period but to be honest I was still unsure of my long term job prospects and couldnt really justify the outlay or decide what to do as in this thread here http://www.pistonheads.com/gassing/topic.asp?=0&am...
Should also add at this point that wife had a big birthday (21) end of Jan and for years has said she wanted a Porsche for her birthday, kind of didnt help team ferrari plans but I gave in and bought her a nice 968, cracking car and safer bet than a boxster in my book mechanically.
So into 2012, still working and needed to get the car serviced, had some good email correspondence with The Ferrari Center in maidstone and decided on them rather than Foskers, Alastair and Roger at the ferrari center seem really good guys and only too happy to work with me, they quoted me £660 to completly go through the car, give it an annual service and provide me with a report, I advised from day 1 that anything I could do myself i.e. discs and pads, clutch etc I would do myself to save money and they were very happy with this set up, so off it went 2 weeks ago with collection the following saturday as we were working on a saturday to saturday basis which they were happy to do.
Once again a big shout for these guys and so nice to find someone that does not take the pi$$ at every opportunity, bill came in at £720 which whilst not £660 did have a couple of little bits I asked them to look at, top guys and worth considering for sure.
They did provide me with a list that at first seemed a little daunting however, but main items were rear discs worn, handbrake shoes worn, front brake hoses will need replacing with Goodrich which I was going to do anyway, and a couple of engine mounts will be needed soon, rads have not got any worse but need to be recorred sometime so I am planning on doing most of this at the same time, have totaled up and will do over next month or so now I can get in the garage without freezing my bits off.
Finnaly picked up a Capristo which is subject of another thread which I will update shortly, initially very dissapointed to find that it sounded pretty normal to me, bit more research and testing and checking to find that my 2 little vacuum solenoids are not doing anything so have ordered up 2 new ones today via amazon of all places or ebay under item search ERG140, my actual bypass valve had seen better days so a new one after some research was ordered from Porsche which can be modified for use (actator arm wants 10mm cutting off) Porsche part number is 997 111 680 00 why I sourced parts myself is that the solenoids are £100 each via eurospares and the exhaust valve appears to be £600 !! amazon / ebay solenoids £43 Porsche valve £60 say no more.
As a little incentive I wired open the capristo for a little blast and insight into what real ferrari ownership sounds like ..... magic, solenoids arrive wednesday I hope, valve fitted last week.
Long way round getting a capristo but should be worth the wait.
Like I say future plans are to slowly go through the jobs list myself once capristo saga sorted, oh also bought some stainless exhaust clamps (V band) at £15 each not £58.
Will keep you posted if anyone still interested.
Regards

lazystudent

1,790 posts

192 months

Monday 2nd April 2012
quotequote all




hehe

Baggio850

425 posts

264 months

Tuesday 3rd April 2012
quotequote all
Glad you're enjoying the car Paul and its good to know that it's being taken care of properly!

I'm on the search for another one already and planning to see a couple of cars next week... smile

Cactussed

5,364 posts

244 months

Tuesday 3rd April 2012
quotequote all
Paul

Your approach is exactly the same as mine. I bought the car with the intention to keep it long term and slowly sort all the little bits and bobs which crop up as and when they arise.
I've gradually gone through most of the car and replaced bits over the 4 years I've owned it however it's a bit like painting the proverbial bridge...


TISPKJ

Original Poster:

3,780 posts

238 months

Tuesday 3rd April 2012
quotequote all
Hi Pardeep, didnt really do much last year to the car as all it really needs is some TLC, luckily I can get in the garage and do most bits myself, little frustrated with this exhaust currently but hopefully bits arrive tomorrow.
What are you looking for this time round ?

Baggio850

425 posts

264 months

Wednesday 4th April 2012
quotequote all
I did consider a 512TR but prices have shot up recently and i would love a 360CS but I think another 355 would be the sensible choice for now. Really wishing I had just kept mine but glad to see its in good hands now.

Hey if I do manage to get one then I might be interested in the quicksilver exhaust. I remember seeing a link on YouTube and thought it sounded amazing.

SimonJW

779 posts

268 months

Wednesday 4th April 2012
quotequote all
YHM

SimonJW

779 posts

268 months

Wednesday 11th April 2012
quotequote all
SimonJW said:
YHM
Hi Paul,

You didn't get mail! There were problems with sending from the forum that day.

I am very interested how this exhaust mod turned out. I've had my 355 since October but the exhaust Vv rattle is really doing my nut!

TIA

Simon

Cactussed

5,364 posts

244 months

Wednesday 11th April 2012
quotequote all
there was an engineer on CS advertising a fix I think.
Strip it and rebuild with new bushings etc.

TISPKJ

Original Poster:

3,780 posts

238 months

Wednesday 11th April 2012
quotequote all
Hi Simon, sorry did not see any mail ...... unless in junk, and I was away over easter.

If its your actual butterfly that is rattling, which I imagine it is then all you need do is adjust the actuator rod a fraction.

DO NOT just twist the rod as the whole vacuum actuator will rip appart, you need to remove the valve and adjust the knuckle a couple of turns to make the rod a little shorter.
Its easy enough

Regards

TISPKJ

Original Poster:

3,780 posts

238 months

Wednesday 11th April 2012
quotequote all
Cactussed said:
there was an engineer on CS advertising a fix I think.
Strip it and rebuild with new bushings etc.
Yes I saw that, and the price :-), however to be honest I doubt the actual butterfly valve would ever fail.
All the problems I have read are with the vacuum switch.

MJK 24

5,679 posts

267 months

Thursday 12th April 2012
quotequote all
Please keep going with an update every few months. It's great to see a 'warts and all' mini blog to olding an older Ferrari. You're an obvious enthusiast and seem very appreciative of the car which makes it all the more interesting! smile

Cactussed

5,364 posts

244 months

Thursday 12th April 2012
quotequote all
Paul,
I think the rattling is usually due to the bushings wearing. Adjusting the rod length opens the butterfly a little and also puts the whole shebang under very slight pressure, which sorts most of the rattling.

I think the rebuild was being quoted around 100 quid or thereabouts?

TISPKJ

Original Poster:

3,780 posts

238 months

Friday 13th April 2012
quotequote all
£200 ...... fine for you rich city boys :-)

http://www.clubscuderia.co.uk/forum/showthread.php...

Cactussed

5,364 posts

244 months

Friday 13th April 2012
quotequote all
That's the one.
I'll be doing that once the time comes rather than shelling out 7-900 for a new one from Capristo or Ferrari...

TISPKJ

Original Poster:

3,780 posts

238 months

Friday 13th April 2012
quotequote all
Andrew, I take it you have tried to adjust out a little already ?

Cactussed

5,364 posts

244 months

Friday 13th April 2012
quotequote all
Um. I actaully gave mine the mk IV modification with a few strategic spots of weld. Seems to have worked a treat for the last few years. No rattles or anything.