ferrari 360 exhaust cats white dust
ferrari 360 exhaust cats white dust
Author
Discussion

Mike Brown

Original Poster:

585 posts

218 months

Tuesday 1st October 2013
quotequote all
I have been noticing white dust/powder below my nearside cat on my 360 , the car runs great, is this ok to leave and continue to use, appreciate any advice , Mike

sidned

480 posts

247 months

Tuesday 1st October 2013
quotequote all
This is perfectly normal. The silencer is the cause of the issue rather than the cats. I assume you have the original silencer installed? Have a search on the forums and there are a number of posts about this. It's inconvenient more than a danger to the car as you have to keep dusting off the engine bay. Most people change the silencer to an aftermarket one to provide a bit more noise and this will also solve the dust issue too. smile

Mike Brown

Original Poster:

585 posts

218 months

Tuesday 1st October 2013
quotequote all
Yes its original exhaust and the cars done 28k the exhaust looks to be in good shape and does not blow and I cannot see any splits or leaks, so I wonder where and how this dust gets there, its actually whitish/grey and very fine its seems a to even glisten a little in sunlight when I blow it off, its a 2004 model so not the oldest about, many thanks Sidned, Mike

cayman-black

13,268 posts

247 months

Tuesday 1st October 2013
quotequote all
Yes had this on all my Modenas. Drove me mad but the car was fine!

steelej

1,761 posts

238 months

Tuesday 1st October 2013
quotequote all
Mike Brown said:
Yes its original exhaust and the cars done 28k the exhaust looks to be in good shape and does not blow and I cannot see any splits or leaks, so I wonder where and how this dust gets there, its actually whitish/grey and very fine its seems a to even glisten a little in sunlight when I blow it off, its a 2004 model so not the oldest about, many thanks Sidned, Mike
The 430 had this problem too, the heatshield material in the silencer breaks down into a powder due to the heat and starts coming out of the weld gaps. Someone on ferraichat took one apart once but i can find the link or i'd post it here.

John.